Ford FPV DRIF6 Concept (Australia)
2 Attachment(s)
Ford FPV DRIF6 Concept (Australia) - realizat de Ford Performance Vehicles si Prodrive si dedicat driftingului.
Dealii pe scurt:
- 4.0-litri,DOHC, 6 cilindri in linie, turbo
- putere: 380kW(510hp)
- cuplu: 700Nm
Fisa tehnica:
Quote:
DRIF6 Specifications
Body:Lightweight F6 Typhoon, Four-door sedan
Engine:Turbo-charged and intercooled 4.0-litre DOHC in-line six cylinder
Turbo charger:Garrett GT 35/40
Induction system:Hand-made twin-plenum manifold with custom three-inch pipes from
turbo charger and intercooler. Ram air intake from lower front bumper into K & N pod filter
Engine Management System:Customised calibration
Exhaust:Stainless Steel three-inch straight-through with side outlet
Intercooler:Front mounted 600mm x 300mm x 75mm
Power: Aprox 380kW
Torque:Aprox 700Nm
Clutch:AP Racing twin-plate
Differential:Locked rear differential, 3.73:1 final drive
Brakes:Cross-drilled and pillar ventilated 355mm x 32mm front and 330mm x 28mm rear rotors with Brembo six-piston monoblock front and four-piston rear callipers. HIS braided hoses. Pull-operated hydraulic handbrake with Tilton brake proportioning valve.
Seats:MOMO
Steering wheel: MOMO
Harnesses:Four-point MOMO race harnesses
Battery:Optima; mounted in rear of cockpit with central-mounted kill switch
Gauges:VDO monster tacho, Autron tyre pressure monitoring system
Wheels:19x8 inch five-spoke alloy in Dark Argent
Tyres:245/35 ZR19 Dunlop SP Sport Maxx
Lubricant:Castrol Edge 0W-40
|
[Concept Cars...]
|
