Vand Kit Wideband de la Innovate modelul LM-1 RPM Kit: Digital Air/Fuel Ratio Meter plus LMA-2 (RPM Converter.) in perfecta stare de functionare.
Ideal pt reglarea oricarui Piggyback sau stand-alone pt ca poate loga intern mai multi parametrii analogi
Kit-ul include :
LM-1 Digital Air Fuel Ratio Meter
LMA-2 RPM Converter (Aux Input #2)
Bosch 5-wire Wideband 02 Sensor
Analog Output Cable
10ft. Sensor Cable
10ft. Power Cable (Cig)
6ft. Serial Cable for PC Connection
Logworks Software CD
Quick Start Guide
Pret : 239 Euro
Quote:
The LM-1 by Innovate Motorsports is the industry's first and best complete O2 AFR wideband tuning system. A single self-contained unit combines a wideband air/fuel ratio sensor controller, a 6-channel data logger, and an easy-to-read backlit LCD display. This is the unit used by tuners, racers, and engine builders the world over.
The Innovate Motorsports LM-1 RPM Kit is comprised of the basic kit plus the LMA-2 (RPM Converter). This cable contains a circuit to convert a tach signal into an analog RPM signal that can be logged by the LM-1. This cable also has 4 additional terminal screws to tap into and log other 0-5 V analog sensors from your vehicle.
Tuning an engine for maximum power previously required long trial-and-error sessions on a dynamometer. With the LM-1, precise AFR measurement allows the user to correctly adjust many variables- including carburetor jetting, fuel injection, turbo fuel curves, etc.- without long and expensive dyno sessions. The meter’s digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-1’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. World's only fully-digital wideband controller.
Up to 6 Channels of data logging.
Portable/ Handheld.
Display both A/F and Lambda readings in real-time.
Auto calibration to compensate for changes in temperature, altitude, and sensor condition.
Two user configurable analog outputs.
LogWorks - award winning tuning software.
The instrument can sample and store 6 channels of data- air-fuel-ratio and up to 5 other sensor data channels- internally in operation for later analysis on a personal computer. At a sampling rate of 12 samples/second the instrument can store up to 44 minutes worth of data in non-volatile memory. The data can be downloaded to a personal computer using a standard serial port and viewed/analyzed by the included LogWorks software or any standard spreadsheet program:
The Innovate LM-1 also features two analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 1 volt = 10 AFR (.6 lambda) and 2 volts = 20 AFR (1.3 lambda). With the provided LM Programmer software these analog outputs may also be configured by the user.
|
Vand Innovate LM-1 RPM Kit (LM-1 + LMA-2 RPM Converter Cable)
