Spre bucuria mea am rezolvat si problme cu trapa, mai exact cu calibrarea acesteia. Am gasit acest pasi pe un alt forum si am decis sa postez si pe thread-ul meu poate pe viitor va mai avea cineva nevoie.
Pasii ar fi urmatorii :
1.take the sunroof motor cover off
2.make sure switch is connected and sunroof is in the closed position as well as switch is in closed position
3.turn car to on with key
4.remove sunroof motor screws(requires a torx bit)
5.take the motor off its mount but leave the wires attached to it
6.cycle the switch to all the way open, then cycle it to tilt all the way, and finally to the home position
7.put the sunroof motor back in and secure with torx screws
8. test it out and see if it works
Pe mine m-a salvat, sunt convins ca aceasta lucrare ( cu tot cu demontarea plafonului + sistemul de glisare + reparatia in sine) + problema ulterioara cu calibrarea m-ar fi costat foarte mult, asa ca ma simt usurat ca am scapat de o problema care ma deranja destul de mult.